java.lang.Object
- java.lang.Enum<ResponseStatusCode>
- - org.apache.tinkerpop.gremlin.driver.message.ResponseStatusCode

All Implemented Interfaces:

Serializable, Comparable<ResponseStatusCode>
```
public enum ResponseStatusCode
extends Enum<ResponseStatusCode>
```
Response status codes for Gremlin Server responses. Result codes tend to map to HTTP status codes. It is not a one-to-one mapping and there are mapper status codes to be considered.

Author:

Stephen Mallette (http://stephen.genoprime.com)

Enum Constant Summary

Enum Constants
Enum Constant	Description
`AUTHENTICATE`	Code 407: A challenge from the server for the client to authenticate its request.
`FORBIDDEN`	Code 403: The server could authenticate the request, but will not fulfill it.
`NO_CONTENT`	Code 204: The server processed the request but there is no result to return (e.g.
`PARTIAL_CONTENT`	Code 206: The server successfully returned some content, but there is more in the stream to arrive - wait for a `SUCCESS` to signify the end of the stream.
`REQUEST_ERROR_INVALID_REQUEST_ARGUMENTS`	Code 499: The request message was parseable, but the arguments supplied in the message were in conflict or incomplete.
`REQUEST_ERROR_MALFORMED_REQUEST`	Code 498: The request message was not properly formatted which means it could not be parsed at all or the "op" code was not recognized such that Gremlin Server could properly route it for processing.
`REQUEST_ERROR_SERIALIZATION`	Code 497: The request message contains objects that were not serializable on the client side.
`SERVER_ERROR`	Code 500: A general server error occurred that prevented the request from being processed.
`SERVER_ERROR_EVALUATION`	Code 597: The request submitted for processing evaluated by the server with errors and could not be processed.
`SERVER_ERROR_FAIL_STEP`	Code 595: A server error that is produced when the `GraphTraversal.fail()` step is triggered.
`SERVER_ERROR_SERIALIZATION`	Code 599: The server was not capable of serializing an object that was returned from the script supplied on the request.
`SERVER_ERROR_TEMPORARY`	Code 596: A server error that indicates that the client should retry the request.
`SERVER_ERROR_TIMEOUT`	Code 598: The server exceeded one of the timeout settings for the request and could therefore only partially responded or did not respond at all.
`SUCCESS`	Code 200: The server successfully processed a request to completion - there are no messages remaining in this stream.
`TOO_MANY_REQUESTS`	Code 429: Indicates that too many requests have been sent in a given amount of time.
`UNAUTHORIZED`	Code 401: The server could not authenticate the request or the client requested a resource it did not have access to.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`static ResponseStatusCode`	`getFromValue(int codeValue)`
`int`	`getValue()`
`boolean`	`isFinalResponse()`	Indicates whether the status code can only be used in the last response for a particular request.
`boolean`	`isSuccess()`
`static ResponseStatusCode`	`valueOf(String name)`	Returns the enum constant of this type with the specified name.
`static ResponseStatusCode[]`	`values()`	Returns an array containing the constants of this enum type, in the order they are declared.

Methods inherited from class java.lang.Enum
clone, compareTo, equals, finalize, getDeclaringClass, hashCode, name, ordinal, toString, valueOf

Methods inherited from class java.lang.Object
getClass, notify, notifyAll, wait, wait, wait

- Enum Constant Detail
  - SUCCESS
```
public static final ResponseStatusCode SUCCESS
```
    Code 200: The server successfully processed a request to completion - there are no messages remaining in this stream.
    
    Since:
    
    3.0.0-incubating
  - NO_CONTENT
```
public static final ResponseStatusCode NO_CONTENT
```
    Code 204: The server processed the request but there is no result to return (e.g. an Iterator with no elements).
    
    Since:
    
    3.0.0-incubating
  - PARTIAL_CONTENT
```
public static final ResponseStatusCode PARTIAL_CONTENT
```
    Code 206: The server successfully returned some content, but there is more in the stream to arrive - wait for a SUCCESS to signify the end of the stream.
    
    Since:
    
    3.0.0-incubating
  - UNAUTHORIZED
```
public static final ResponseStatusCode UNAUTHORIZED
```
    Code 401: The server could not authenticate the request or the client requested a resource it did not have access to.
    
    Since:
    
    3.0.0-incubating
  - FORBIDDEN
```
public static final ResponseStatusCode FORBIDDEN
```
    Code 403: The server could authenticate the request, but will not fulfill it. This is a general purpose code that would typically be returned if the request is authenticated but not authorized to do what it is doing.
    
    Since:
    
    3.0.1-incubating
  - AUTHENTICATE
```
public static final ResponseStatusCode AUTHENTICATE
```
    Code 407: A challenge from the server for the client to authenticate its request.
    
    Since:
    
    3.0.1-incubating
  - TOO_MANY_REQUESTS
```
public static final ResponseStatusCode TOO_MANY_REQUESTS
```
    Code 429: Indicates that too many requests have been sent in a given amount of time.
    
    Since:
    
    3.5.0
  - REQUEST_ERROR_SERIALIZATION
```
public static final ResponseStatusCode REQUEST_ERROR_SERIALIZATION
```
    Code 497: The request message contains objects that were not serializable on the client side.
    
    Since:
    
    3.3.6
  - REQUEST_ERROR_MALFORMED_REQUEST
```
public static final ResponseStatusCode REQUEST_ERROR_MALFORMED_REQUEST
```
    Code 498: The request message was not properly formatted which means it could not be parsed at all or the "op" code was not recognized such that Gremlin Server could properly route it for processing. Check the message format and retry the request.
    
    Since:
    
    3.0.0-incubating
  - REQUEST_ERROR_INVALID_REQUEST_ARGUMENTS
```
public static final ResponseStatusCode REQUEST_ERROR_INVALID_REQUEST_ARGUMENTS
```
    Code 499: The request message was parseable, but the arguments supplied in the message were in conflict or incomplete. Check the message format and retry the request.
    
    Since:
    
    3.0.0-incubating
  - SERVER_ERROR
```
public static final ResponseStatusCode SERVER_ERROR
```
    Code 500: A general server error occurred that prevented the request from being processed.
    
    Since:
    
    3.0.0-incubating
  - SERVER_ERROR_FAIL_STEP
```
public static final ResponseStatusCode SERVER_ERROR_FAIL_STEP
```
    Code 595: A server error that is produced when the GraphTraversal.fail() step is triggered. The returned exception will include information consistent with the Failure interface.
    
    Since:
    
    3.6.0
  - SERVER_ERROR_TEMPORARY
```
public static final ResponseStatusCode SERVER_ERROR_TEMPORARY
```
    Code 596: A server error that indicates that the client should retry the request. A graph will typically return this error when a transaction fails due to a locking exception or some other sort of concurrent modification. In other words, the request was likely valid but the state of the server at the particular time the request arrived could not be processed to success, but could be at a later moment.
    
    Since:
    
    3.4.11
  - SERVER_ERROR_EVALUATION
```
public static final ResponseStatusCode SERVER_ERROR_EVALUATION
```
    Code 597: The request submitted for processing evaluated by the server with errors and could not be processed. Check the script or remote traversal submitted for errors or other problems and then resubmit.
    
    Since:
    
    3.0.0-incubating
  - SERVER_ERROR_TIMEOUT
```
public static final ResponseStatusCode SERVER_ERROR_TIMEOUT
```
    Code 598: The server exceeded one of the timeout settings for the request and could therefore only partially responded or did not respond at all.
    
    Since:
    
    3.0.0-incubating
  - SERVER_ERROR_SERIALIZATION
```
public static final ResponseStatusCode SERVER_ERROR_SERIALIZATION
```
    Code 599: The server was not capable of serializing an object that was returned from the script supplied on the request. Either transform the object into something Gremlin Server can process within the script or install mapper serialization classes to Gremlin Server.
    
    Since:
    
    3.0.0-incubating
- Method Detail
  - values
```
public static ResponseStatusCode[] values()
```
    Returns an array containing the constants of this enum type, in the order they are declared. This method may be used to iterate over the constants as follows:
    for (ResponseStatusCode c : ResponseStatusCode.values()) System.out.println(c);
    Returns:
    
    an array containing the constants of this enum type, in the order they are declared
  - valueOf
```
public static ResponseStatusCode valueOf(String name)
```
    Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
    
    Parameters:
    
    name - the name of the enum constant to be returned.
    
    Returns:
    
    the enum constant with the specified name
    
    Throws:
    
    IllegalArgumentException - if this enum type has no constant with the specified name
    
    NullPointerException - if the argument is null
  - getFromValue
```
public static ResponseStatusCode getFromValue(int codeValue)
```
  - getValue
```
public int getValue()
```
  - isSuccess
```
public boolean isSuccess()
```
  - isFinalResponse
```
public boolean isFinalResponse()
```
    Indicates whether the status code can only be used in the last response for a particular request.

Enum ResponseStatusCode

Enum Constant Summary

Method Summary

Methods inherited from class java.lang.Enum

Methods inherited from class java.lang.Object

Enum Constant Detail

SUCCESS

NO_CONTENT

PARTIAL_CONTENT

UNAUTHORIZED

FORBIDDEN

AUTHENTICATE

TOO_MANY_REQUESTS

REQUEST_ERROR_SERIALIZATION

REQUEST_ERROR_MALFORMED_REQUEST

REQUEST_ERROR_INVALID_REQUEST_ARGUMENTS

SERVER_ERROR

SERVER_ERROR_FAIL_STEP

SERVER_ERROR_TEMPORARY

SERVER_ERROR_EVALUATION

SERVER_ERROR_TIMEOUT

SERVER_ERROR_SERIALIZATION

Method Detail

values

valueOf

getFromValue

getValue

isSuccess

isFinalResponse